packing tower
英 [ˈpækɪŋ ˈtaʊə(r)]
美 [ˈpækɪŋ ˈtaʊər]
网络 填充塔; 填料塔
双语例句
- Among general packing in the current packing tower, some a packing is formed by mutually overlapping meshy plates or platelike objects with large holes, the packing has smaller specific surface area.
目前填料塔内常用的填料中，有一类是通过网状片或带有大孔的片状物相互叠加而成的，这类填料的比表面积较小。 - Owing to the scale-up effect of large packing tower, polymerization and fouling occur generally in the tower.
由于大型填料塔存在着放大效应，物料在汽油分馏塔内聚合结垢是一普遍问题； - The trough type liquid distributor is the main part of packing tower for large scale refined unit.
槽式液体分配器是大型炼油装置中填料塔中重要组成部分。 - The utility model relates to rolling hole corrugated packing which belongs to packing used in a packing tower.
本实用新型涉及一种压延孔波纹填料，属于用在填料塔内的填料。 - The utility model has larger void ratio and specific surface area and also increases the mass transfer efficiency between gas and liquid when used as packing in the packing tower.
本实用新型具有较大的空隙率和比表面积，提高气液两相间的传质效率。 - Application of bio-packing tower in wastewater treatment
生物填料塔在污水处理中的应用 - The high efficiency packing tower was applied in isolation process of aqueous ammonia contained carbon dioxide.
将高效填料塔应用于含碳氨水集成分离技术。系统处理效率高，并发可控性高； - The paper introduces the design and application of large scale packing tower fitted with new regular packing, gas/ liquid distributor and initial distributor of feed gas.
本文介绍了大型填料塔采用新型规整填料、气液分布器及进气初始分布器的现状、设计及应用。 - The hydrodynamic calculating method of countercurrent packing tower was discussed, and the algorithm of which was briefly reviewed.
讨论了逆流填料塔的流体力学计算方法，对泛点算法作了简要的回顾。 - Study on Application of Desorption Packing Tower in Brine Desulphurization Process
解吸填料塔在卤水脱硫工艺中的应用性研究 - The factor analysis of desulfurization effect on packing tower-natrium alkali method
填料塔-钠碱法脱硫效果的影响因素分析 - The influence of structural parameters of plastics porous corrugated plate packing on its hydrodynamic performance was investigated in a Φ 300 mm packing tower with air-H 2O system.
在内径为300mm的填料塔中，以空气-水为物系，研究了塑料孔板波纹填料的结构参数对其流体力学性能的影响。 - Gas-liquid distribution of packing tower and design of distributor
填料塔的气液分布及分布器的设计 - Beginning with adhesion and cohesion work equilibrium analysis of solid/ liquid boundary, and combining idle flow of liquid on packing round surface, through allowable wetness value, it leads to calculation formula for packing tower minimum wetness rate via utilizing thermodynamic method.
从固/液界面的粘附功和内聚功平衡分析入手，结合流体在填料环壁表面的理想流动，通过湿润准数，利用热力学方法，导出了填料塔最小润湿速率的计算公式。 - The gas liquid distribution relationship in packing tower under various situations is introduced in the article. The performance comparison and design application of several new type gas-liquid distributors is shown as well.
本文介绍了不同场合下的填料塔内的气液分布关系以及多种新型气液分布器的性能比较及设计应用。 - The new process of heavy aromatics separation and the technique of high efficiency regular packing tower are introduced.
介绍了重芳烃分离装置新工艺和高效规整填料塔技术。 - Development of packing tower
填料塔的发展 - The basic principles, characteristics, research progress, and development trend of new distillation technologies such as extractive, azeotropic, reactive, adsorptive, membrane, inert gas distillations, dynamic-state high performance structured packing tower distillation, and molecular distillation were presented.
介绍了萃取精馏、共沸精馏、反应（催化）蒸馏、吸附蒸馏、膜蒸馏、惰性气体蒸馏、动态高效规整填料塔精馏和分子蒸馏等新型蒸馏技术的基本原理、特点、研究进展和发展方向。 - It sets forth effective ways to improve packing tower wetness based on basic regularity and specific effect during the packing as well, and illustrate practical application situation as well as application result of the calculation formula by samples.
基于填料润湿的基本规律，以及填料过程中的特殊效应，提出了改善填料塔润湿的有效途径。并举例说明了该计算公式的实际应用情况及应用效果。 - Deep study is done for the design model and standards of liquid distributor in large-sized packing tower. Related achievements are applied in practical project design.
对大型填料塔液体分布器的设计模型及设计标准进行了深入的研究，并将成果应用于实际工程设计中。 - Progress in the Studies on Fluid Flow in Structured Packing Tower and Its Prospect
规整填料塔内流体流动研究进展及展望 - In order to solve the effect problem, a model of distillation process for packing tower is set up to calculate the reasonable minimum reflux ratio and bottom temperature of the tower.
为解决分离效果问题在开车过程对填料塔的精馏过程建立模型，推算出适宜的回流比和塔釜温度。 - The new type regular filler and inner parts of packing tower which were successfully developed in recent 10 years inland and abroad were summarized, their performance and industrial application status were introduced briefly.
概述了国内外十多年来开发成功的新型规整填料及填料塔内件（新型气液分布器、填料塔进气初始分布器），并对其性能及工业应用情况作了简要介绍。 - The influence of structural parameters of corrugated plate packing on its performance of axial mixing in liquid phase and hydrodynamic and mass transfer was investigated in a Φ 300? mm ID packing tower.
在内径Φ300mm的填料塔中研究了孔板波纹填料的结构参数对液相轴向混合特性、流体力学和传质性能的影响。 - Calculation Comparison of Flood Point of Packing Tower/ Pressure Drop Model
填料塔泛点/压降模型计算比较 - A liquid distributor of good performane plays the key role in packing tower designs.
性能优良的液体分布器是填料塔设计的关键。 - The process of NO_2 removal from indoor polluted air by using aqueous solutions of Na_2SO_3 in a NO_2 absorber and a random packing tower was conducted.
分别在鼓泡反应器和填料吸收塔中研究了Na2SO3/MEA混合水溶液对室内空气中微量NO2的净化过程。 - The biofilm micro-community in bio-packing tower is detected and purifying the waste gas of low styrene concentration with bio-packing tower is analyzed.
采用生物膜填料塔进行了净化低浓度苯乙烯废气的实验研究及生物膜内微生物菌群分析。 - Applying regular packing tower, with high efficiency, in distilation process can get good effect of energy& saving.
将高效规整填料塔应用于蒸馏过程能取得良好的节能效果。 - Application of High Efficiency Structured Packing Tower Technique in the Process of PA Refining
高效规整填料塔技术在苯酐精制过程中的应用